Which Factories Make the Best Ditoner collectible watches: C Factory's Daytona and Aqua Ghost Compared to N Factory

What are the major manufacturers of Ditoner collectible watches

1. c Factory has always taken the style of N Factory to the extreme including the Aqua Ghost. DETUNE. Journal. Greenwich style. Why is the C Factory's Daytona overall better than the previous N Factory? There are mainly the following aspects. 1. movement: n the same paragraph 4130 movement whole table thickness and genuine basically the same 2. accessories: c factory ring mouth is the industry's first, before it is supplied to the major manufacturers, including the previous vs. zf all the water ghosts have used the C factory ring mouth. The panel is also the only version of dead white on the market.

2, n factory Dinatone:Mention Dinatone copy, you may first think of the N factory Dinatone. It is also the king of the generation So, if there is now a businessman to talk to you about the n factory Dinatone, directly delete the line. There is no such version on the market, and it is not clear exactly when it will come out.

3, EW Speaking of which, Factory Ditoner EW, I am a very favorite manufacturer. It's also an old manufacturer. The goods from this manufacturer are all cost-effective models. Including our factory log, yacht, water ghost, Diton do well, the price is also relatively low. Today, we will mainly talk about ew factory Ditonne. If you take ew and c factory compared to the ditone. In fact, to be honest, there is still a grade difference. The customer base is also very clear. Like c factory Ditongna certainly will not choose ew. choose ew customers mainly look at the cost-effective. After all, the difference between the two factories is more than a thousand. The most important difference is the movement ew4130 movement 7750 revision. Less than 13mm such thickness. Careful comparison can be seen But we must know that 7750 movement to achieve this thickness is not easy. Take the previous JH Ditto said. The thickness is much thicker. When it comes to the 7750 movement, you may think that the repair rate is very high, but the ew Ditone movement verification is not bad, basically no counter repair. You can go in with confidence, and the ew color scheme is relatively full. So those looking for value for money can concentrate on the ew version.

These are about some of the very well done Dittoner collectibles in the market. Although there are also 3 of them. Because there are many more in the market, such as JH factory Dinatone, imitation N version Dinatone, (BT) factory Dinatone.

What's the difference between a C-factory and a BT Ditonner?

Factory C and BT Factory Ditto back in terms of price. There is a difference between the two manufacturers, with a price difference of about 200, with Factory C being a bit more expensive. Let's move on to the details:

Literally can say there is no difference at all, or the difference in comparison is the color temperature of the dial. In terms of the overall color temperature, the pointer C factory gold both dial and pointer BT's more "Before n factory some of the products are often spit out, these two manufacturers have a great improvement, mushroom head and so on also have a good improvement. Scale is not the same. Up and down - home is a manufacturer specializing in the civilized background of the ring mouth. There's not much difference in the watch city tasting under magnification anyway.

To learn the details of precious metal stenciling, here are 50 steps and 100 steps. After all, the cost is here. The precision of the machine is here. At magnification, it is almost the same. Those who always prefer to compare these extreme positions with the genuine article are not necessary. Here, we can clearly see the darker color of Factory C's buttons. I think we are more concerned about color durability. If you think a few hundred dollars is more reliable, take Factory C. As far as quality is concerned, I really don't feel there is a qualitative distance between the two, but now that BT advertising and copywriting is at its most aggressive, it's only natural that more people will buy them chasing BT. Decide for yourself which one to buy.

Which is better, the N or the C Ditto?

C factory labor land toner has been launched for a period of time, the purchase of the watch friends have received the goods, the use of the feedback is very good, C factory through the overall watch disk of the overall pointer fineness, three-dimensional feeling, burr C factory can be directly N factory v3 in addition to the pointer, directly on the ground friction, in fact, the C factory dial of each needle groove has also done a primitive sinking, can be better hidden pointer shafts Gap, the dial looks very full.

C factory pointer center high, both sides low, reflective surface, three-dimensional, N factory V pointer only a word "flat" N factory late factory V4. only by memory memory, and now the contrast compared to the V3 improved, but I still think C factory should be better. After all, this manufacturer rely on the pointer and literal skills to kill the blood, completely beyond is not surprising.

The nails are hardly different and all have been treated well and smoothly. However, many users have a very metaphysical understanding of how the scale is handled. The nails are sanded down to a log type. Real log nails are cut very sharp. If you look at the authenticity of a watch, you still need to see more of the real thing and learn the technical documentation. statement was made to some keyboard watch buyers. Scale and before the same 婩Clean bracelet bezel, this bracelet bezel VS factory has chosen, their own brand must have halo support, the key points are 100 points. N factory this has been used for a long time, has begun to gray, lost the comparability. a long time will be a little old, but the C factory round color durability problem can be fully accepted.

With the manufacturer's instructions AR strap, which I tested for open and close feel, etc. passed completely, the overall workmanship is about the same or slightly superior to the N. There's no need for us to step on the other one.

Which is the best factory for Ditoner collectible watches?

Now there are only two producers to produce and manufacture Rolex Daytona collectible watches, NN factory 4130 watch movement Daytona is the better factory and C factory. And now the price is super high, the manufacturer up to about 5000. I don't know what the user's price is, so ordinary merchants will not sell.

As a classic retro mechanical watch, Rolex Daytona so has been highly sought after, will this one Dinatone pushed to the collectible watches industry ceiling, until the N factory after the incident, its Dee price once soared more than 6,000 oceans, and also out of stock, and now, the factory has also launched a 4130 movement, let's take a look at the difference between this movement and the N factory, whether it can replace the status of the N factory in the hearts of the watch enthusiasts.

After removing the cover, see the core of the second, C factory claimed that 4130 watch core and N factory the same, N factory 4130 watch core is not much different, there are rumors that the Dandong factory was warned not to do this one core, as if there must be a courageous reward This is also the previous N factory out of 4130 watch core publicity and promotional programs, the basic function of the 100% fully achieved, the original table selection of the customized version of the KIF. Damper.

CLEAN ceramic ring buff thin thickness 12 of the factory watch hand.2-12.In the middle of 3, the connection between the glass and the case is completely transparent, there is no white edge of the glass rim arc in line with the original, glass protruding ceramic ring height is the same as the original. The use of ceramic ringclean font is more three-dimensional and rounded, ceramic ring edges have slight rounded corners, the word pegs have rounded grinding and polishing, luminescence add to the relative height of the relative moderate, moderate color ok, font style packaging printing is three-dimensional. The small black circle is the same size as the original. The top of the connection to the case is seamless with sharp corners. The top of the strap/case and seamless strap/shell head particles are level with the case and the end is slightly concave
These details have been fully restored. I think that the C Factory Rolex Daytona is totally an enhanced version 4 of the N Factory, so if you also like this Daytona, then choose the best version of the c factory Daytona at the moment!