How to Verify an 18K Gold Watch by Checking Color, Texture, and Gold Content

It is not made of pure gold and is usually made of gold, silver, copper, zinc alloys or wrapped in the outer layer of the case by mechanical or electrolytic methods. Due to the soft texture and low hardness of pure gold, it is not easy to wear and tear, and is not suitable for making cases. The hardness of gold is much higher than that of pure gold, so it is very strong and inexpensive to use for case making or plating.

One, according to the color and texture to distinguish gold 18K.

As far as color is concerned, this gold jewelry is high not high. The higher the gold content of the gold jewelry, the darker the color. And the color of 18K gold is between egg yolk and golden yellow, when identifying 18K gold, you can also consider and distinguish from the color. As far as the material is concerned, 18K gold has a better texture than gold, and it also looks brighter. Perhaps the fake 18K gold is that it is very rough to the touch, the interface is larger, and there are even obvious traces of discoloration.

Second, from the steel mark and weight to identify 18K gold.

When you buy 18K gold jewelry from this store, you will find that the logo is clearly marked with 18K gold and will have an exclusive steel stamp. If it is fake, it will most likely not have the words steel seal or 18K gold, and it is also important to worry at this point and not be fooled by the store's claims. In terms of weight, 18K gold is slightly lighter when compared to pure gold, but slightly lighter when compared to other metals. It can be said to be fake, then it is light to the touch and does not have any weight.

Third, from the after-sales service to identify 18K gold.

Compared to 18K gold, which is more suitable for sale in stores, 18K gold can be cleaned and polished regularly. If it is fake it can be repaired, and polished.

Four, details.

Take the watch apart and perform a core inspection, such as the most unsuitable places: strap piercing pegs, sleeves, strap knuckles, etc. There is a clear difference between the two parts in the original watch, and even the most advanced imitations do not have such places. Dials with springs and popping pins are connected by springs. Fake bars are usually outsourced, so they are different from the real watch.

In addition, the real watch shanks are also very different and mounted differently. If a karat gold watch shank head is also gold in color, but a watch may be steel in color and usually has no internal teeth. Here's a table that can be pulled out.

Five, the movement.

Certain major cores, on the surface, are easier to detect cleats, e.g., shock absorbers. Different item numbers and different grades, the lower grade commonly used is the triangle shock absorber, collectible watches look more.